China smart reader manufacturer & supplier

sell 13.56MHZ rfid reader Interface: RS232C or USB

MR701

MR701 series (the desktop reader) are the RS232C or USB interface IC card reader/writer.And the reader embeds two SAMcard slots.

2014-09-25

sell TCP/IP HF rfid R/W reader Interface: Ethernet RJ45 reading ICODE1&2

MR730

MR730 series contactless IC card reader/writer are the Ethernet interface desktop reader. There is one SAM card slot in the reader.

2014-09-25

sell 13.56MHz rfid reader ISO15693

MR760G

MR760 IC card is desktop reader/writer with USB interface (HID standard). And it can set freely read-only the serial number or the data of the card.

2014-09-25

sell HF rfid smart reader(MR761)

MR761 series (the desktop reader) are the USB (HID standard) interface IC card reader. There are 2 SAM card slots in the reader.

2014-09-25

sell HF rfid smart reader(MR780) Interface: RS232C or USB

MR780 series (the desktop reader) are the RS232C or USB (build-in USB to UART converter) interface IC card reader/writer.

2014-09-25

sell 13.56MHz rfid reader(MR790) ISO15693 ISO14443A ISO14443B USB

MR790UA,MR790UC,MR790UG,MR790UH

MR790 series (the desktop reader) are the USB PC/SC interface IC card reader/writer.There are 3 SAM card slots in the reader.

2014-09-25

sell 13.56MHz rfid reader ISO15693 ISO14443A ISO14443B USB PC/SC

MR810UA,MR810UC,MR810UG,MR810UH

MR810 (USB PC/SC interface) IC card reader/writer develops on AMR7 MCU. it comprehensively supports EMV2000 & PBOC 2.0.

2014-09-25

sell HF rfid R/W reader(MR800UC) ISO14443A ISO14443B USB PC/SC

The shell of MR800 contains wall mounting type and desktop vertical type. The reader embeds 128×64 LCD display module.

2014-09-25

sell USB HF rfid reader(MR800UH) ISO15693 ISO14443A ISO14443B ARM7 MCU

MR800UHN,MR800UHV

The shell of MR800 contains wall mounting type and desktop vertical type. The reader embeds 128×64 LCD display module.

2014-09-25

HF rfid module(JMY502M) Interface: IIC & UART

The module and antenna are separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm.

2014-09-25

hf rfid module(JMY503L) Interface: IIC&UART

JMY503 is the high performance and low-power dissipation RFID Module. The module and antenna are separate design.

2014-09-25

13.56MHz HF RFID reader/writer module-JMY504A(ISO14443A/)

JMY504A,JMY504C

JMY504 series are the high performance and low cost RFID Module. And the module and antenna are separate design.

2014-09-25

13.56MHz.rfid module(JMY505G) ISO15693 Interface: IIC & UART

The module and antenna are separate design. 50ohm coaxial line are linked the antenna and module.

2014-09-25

sell UART(TTL level) HF rfid read&write module RC632 RC531 chips

The EMC of the module (with four layers PCB) is excellent. The interface is UART (RS232 in TTL level).

2014-09-25

13.56MHz HF RFID reader/writer module JMY602H(ISO14443A/B ISO15693)

JMY602A,JMY602C,JMY602G,JMY602H

The module and antenna are integrated design. The impedance between RF module and antenna was tuned by impedance analyzer.

2014-09-25

HF rfid moule ISO14443A

JMY603A,JMY603C,JMY603H

The interface is UART(RS232 level). The module supports series CPU cards according to ISO14443A, ISO14443B and Mifare 1K & Mifare 4K etc.

2014-09-25